Skip to content
Audi MediaCenter
Models

Audi SQ8 TFSI

Audi SQ8 TFSI

Audi is presenting the SQ7 and the SQ8 with new TFSI engines. The brand is thus responding to the worldwide trend toward sporty gasoline engines in the high-performance SUV segment. In terms of their suspension, the Audi SQ7 TFSI and the Audi SQ8 TFSI offer many high-tech components, and new connectivity and assist functions round off the technology package. The large S models will be launched on the European markets successively, starting in the fall of 2020.

Technical details

Audi SQ8 TFSI tiptronic (373 kW)
Engine type V8 engine
Displacement in cc / bore x stroke in mm / compression 3996 / 86.0 x 86.0 / 10.1
Max. power output in kW (hp) / at rpm 373 (507) / 5500
Max. torque in Nm (lb-ft) / at rpm 770 (567.9) / 2000 - 4000
Top speed in km/h (mph) 250 (155.3)
Acceleration, 0-100 km/h (0-62.1 mph) in sec 4.1
Combined fuel consumption in l/100km 12.2 - 12.1
Combined CO2-emissions in g/km 279 - 277
Unladen weight according to EU (excluding driver) / (including driver) / gross weight limit in kg (lb) 2270 (6106.8) / 2345 (5169.8) / 2960 (6525.7)
Download data sheet
Technical specifications and data:
Audi SQ8 TFSI tiptronic (373 kW)
Download

Press Releases

  • 09/15/20
    Models

    Sporty character with a superior performance: The Audi SQ7 and SQ8 with V8 TFSI gasoline engine

    Audi is presenting the SQ7 and the SQ8 with new TFSI engines. The brand is thus responding to the worldwide trend toward sporty gasoline engines in the high-performance SUV segment. In terms of their suspension, the Audi SQ7 TFSI and the Audi SQ8 TFSI offer many high-tech components, and new connectivity and assist functions round off the technology package. The large S models will be launched on the European markets successively, starting in the fall of 2020.
    Download PDF
  • 08/26/20
    Models

    Comfortable and agile – Audi’s eAWS technology turns SUVs into quick-change artists

    How do you provide a large SUV with sporty road-holding properties and minimal body roll without impairing ride comfort? Audi has resolved this conflict of objectives by means of electromechanical roll stabilization (eAWS). Assisted by the 48-volt onboard electrical system and powerful actuators, the stabilizers on the front and rear axle can be actively controlled according to the driving situation.
    Download PDF
  • 07/15/20
    Models

    Superior performance: The Audi SQ7 and Audi SQ8 with V8 TFSI engine

    Audi presents the SQ7 and the SQ8 with new TFSI engines. The brand is thus responding to the worldwide trend toward sporty gasoline engines in the high-performance SUV segment. The Audi SQ7 and SQ8 feature numerous high-tech suspension components and offer new connectivity and assistance functions. They will launch on the European markets beginning in autumn 2020.
    Download PDF

More Content

© 2022 by AUDI AG. All rights reserved.

The indicated consumption and emissions values were determined according to the legally specified measuring methods. Since September 1, 2017, type approval for certain new vehicles has been performed in accordance with the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Since September 1, 2018, the WLTP has gradually replaced the New European Driving Cycle (NEDC). Due to the more realistic test conditions, the consumption and CO2 emission values measured are in many cases higher than the values measured according to the NEDC. Additional information about the differences between WLTP and NEDC is available at www.audi.de/wltp.

At the moment, it is still mandatory to communicate the NEDC values. In the case of new vehicles for which type approval was performed using WLTP, the NEDC values are derived from the WLTP values. WLTP values can be provided voluntarily until their use becomes mandatory. If NEDC values are indicated as a range, they do not refer to one, specific vehicle and are not an integral element of the offer. They are provided only for the purpose of comparison between the various vehicle types. Additional equipment and accessories (attachment parts, tire size, etc.) can change relevant vehicle parameters, such as weight, rolling resistance and aerodynamics and, like weather and traffic conditions as well as individual driving style, influence a vehicle’s electric power consumption, CO2 emissions and performance figures.

Further information on official fuel consumption figures and the official specific CO2 emissions of new passenger cars can be found in the “Guide on the fuel economy, CO2 emissions and power consumption of all new passenger car models”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Str. 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).

DE 
EN
Back to top